|
Post by gfaust on Dec 2, 2022 16:28:55 GMT
I used BLES02057
RPCS3 version 0.0.6-8501
That version doesn't support the patch that removes access violation error, how do I by pass this? Everything on the latest version of the emulator works but when i get to this step
"ONCE a beep is heard unpause and make MA stand STILL and do nothing
pause and press SELECT + UP PAD ARROW"
Nothing happens in the latest version
So how do I bypass access violation in this version of the emulator 0.0.6-8501?
|
|
Ryko
New Member
My name is Quan Lễ Bân, nice to meet you all guy!
Posts: 9
|
Post by Ryko on Dec 3, 2022 2:21:01 GMT
I used BLES02057 RPCS3 version 0.0.6-8501 That version doesn't support the patch that removes access violation error, how do I by pass this? Everything on the latest version of the emulator works but when i get to this step "ONCE a beep is heard unpause and make MA stand STILL and do nothing pause and press SELECT + UP PAD ARROW" Nothing happens in the latest version So how do I bypass access violation in this version of the emulator 0.0.6-8501? this happens when you haven't installed according to the instructions, please add BIG ENDIAN Supported in Cheat Engine, i added it and the mod is done perfectly just i still haven't figured out how to enable the camera zoom mode.
|
|
|
Post by gfaust on Dec 3, 2022 2:59:13 GMT
I used BLES02057 RPCS3 version 0.0.6-8501 That version doesn't support the patch that removes access violation error, how do I by pass this? Everything on the latest version of the emulator works but when i get to this step "ONCE a beep is heard unpause and make MA stand STILL and do nothing pause and press SELECT + UP PAD ARROW" Nothing happens in the latest version So how do I bypass access violation in this version of the emulator 0.0.6-8501? this happens when you haven't installed according to the instructions, please add BIG ENDIAN Supported in Cheat Engine, i added it and the mod is done perfectly just i still haven't figured out how to enable the camera zoom mode. I have big endian in my cheat engine, it is nothing to do with cheat engine I think, when i use the version of emu 0.0.06-8501 it crashes when loading a game. I will try again with the latest emulator with the patch enabled.
|
|
|
Post by gfaust on Dec 3, 2022 4:07:01 GMT
So i updated cheat engine and added every Big Endian, so it has nothing to do with CE. Once I start a game the game crashes the emulator says access violation with the version 0.0.6-8501 If i use the newest version of the emulator with the access violation patch, the game works.
But "Once in battle press SQUARE to do melee attack and once unit starts doing the FIRST attack immediately pause.Press R3 + Up Pad on the Controller. Then a beep shall be heard" This works, when i melee pause and press R3+UP the beep happens the issue is then "oNCE a beep is heard unpause and make MA stand STILL and do nothing" I do this as well.
"pause and press SELECT + UP PAD ARROW" I pause the game press select and up arrow. Nothing happens, no noises when i return to the game my camera is freaky out and nothing else happened.
I am confused.
|
|
Ryko
New Member
My name is Quan Lễ Bân, nice to meet you all guy!
Posts: 9
|
Post by Ryko on Dec 3, 2022 4:23:47 GMT
So i updated cheat engine and added every Big Endian, so it has nothing to do with CE. Once I start a game the game crashes the emulator says access violation with the version 0.0.6-8501 If i use the newest version of the emulator with the access violation patch, the game works. But "Once in battle press SQUARE to do melee attack and once unit starts doing the FIRST attack immediately pause.Press R3 + Up Pad on the Controller. Then a beep shall be heard" This works, when i melee pause and press R3+UP the beep happens the issue is then "oNCE a beep is heard unpause and make MA stand STILL and do nothing" I do this as well. "pause and press SELECT + UP PAD ARROW" I pause the game press select and up arrow. Nothing happens, no noises when i return to the game my camera is freaky out and nothing else happened. I am confused. I use latest emulator 0.0.25 and add big endian 2.4 and float, then right place value type set ALL.. and do as per mod instructions, it will run.. i did did so and it worked fine
|
|
|
Post by Lord Meiyoh on Dec 3, 2022 5:17:04 GMT
Quan can you make a video tutorial for him to learn ? Seeems he doesnt follow instructions properly
|
|
Ryko
New Member
My name is Quan Lễ Bân, nice to meet you all guy!
Posts: 9
|
Post by Ryko on Dec 3, 2022 7:02:09 GMT
|
|
|
Post by Lord Meiyoh on Dec 3, 2022 7:55:35 GMT
Moved to discussions as not considered a feedback.
|
|
Ryko
New Member
My name is Quan Lễ Bân, nice to meet you all guy!
Posts: 9
|
Post by Ryko on Dec 3, 2022 8:01:22 GMT
So i updated cheat engine and added every Big Endian, so it has nothing to do with CE. Once I start a game the game crashes the emulator says access violation with the version 0.0.6-8501 If i use the newest version of the emulator with the access violation patch, the game works. But "Once in battle press SQUARE to do melee attack and once unit starts doing the FIRST attack immediately pause.Press R3 + Up Pad on the Controller. Then a beep shall be heard" This works, when i melee pause and press R3+UP the beep happens the issue is then "oNCE a beep is heard unpause and make MA stand STILL and do nothing" I do this as well. "pause and press SELECT + UP PAD ARROW" I pause the game press select and up arrow. Nothing happens, no noises when i return to the game my camera is freaky out and nothing else happened. I am confused. I use latest emulator 0.0.25 and add big endian 2.4 and float, then right place value type set ALL.. and do as per mod instructions, it will run.. i did did so and it worked fine you can watch and follow my video tutorial, hope it can helps you.. www.youtube.com/watch?v=ft_0I-Xw8q8
|
|
|
Post by gfaust on Dec 4, 2022 16:25:48 GMT
I use latest emulator 0.0.25 and add big endian 2.4 and float, then right place value type set ALL.. and do as per mod instructions, it will run.. i did did so and it worked fine you can watch and follow my video tutorial, hope it can helps you.. www.youtube.com/watch?v=ft_0I-Xw8q8 www.youtube.com/watch?v=tqHzOIAjmFsI followed exactly as the video entails, you cannot hear the beeps since my software cant record my desktop only the game. I get the beep when i attack and then pause. As you can see when i stand still pause and do SELECT+UP ARROW. Something else i happening and I'm not sure what im doing wrong my camera freaks out and nothing else happens, you cant hear it but there also no multiple beeps like in your video. I swear I followed everything exactly like your video and Lord's instruction but as you can see this happens, with my MA, it also happens to Psycho Gundam. I'm sorry I dont get why pressing SELECT+UP doesnt cause the multiple beeps and does the camera shaking only.
|
|
Ryko
New Member
My name is Quan Lễ Bân, nice to meet you all guy!
Posts: 9
|
Post by Ryko on Dec 18, 2022 6:17:52 GMT
www.youtube.com/watch?v=tqHzOIAjmFsI followed exactly as the video entails, you cannot hear the beeps since my software cant record my desktop only the game. I get the beep when i attack and then pause. As you can see when i stand still pause and do SELECT+UP ARROW. Something else i happening and I'm not sure what im doing wrong my camera freaks out and nothing else happens, you cant hear it but there also no multiple beeps like in your video. I swear I followed everything exactly like your video and Lord's instruction but as you can see this happens, with my MA, it also happens to Psycho Gundam. I'm sorry I dont get why pressing SELECT+UP doesnt cause the multiple beeps and does the camera shaking only. I think this error is caused by the part you install big Endian. Please try reinstalling Big Endian like in this video because i installed it that way and it works fine with gundam mod, i hope you have good luck, wish you success.. www.youtube.com/watch?v=qD5CZN2-3_k&t=5s&ab_channel=Postposterous
|
|
|
Post by lorhoriel on Mar 5, 2023 10:18:25 GMT
www.youtube.com/watch?v=tqHzOIAjmFsI followed exactly as the video entails, you cannot hear the beeps since my software cant record my desktop only the game. I get the beep when i attack and then pause. As you can see when i stand still pause and do SELECT+UP ARROW. Something else i happening and I'm not sure what im doing wrong my camera freaks out and nothing else happens, you cant hear it but there also no multiple beeps like in your video. I swear I followed everything exactly like your video and Lord's instruction but as you can see this happens, with my MA, it also happens to Psycho Gundam. I'm sorry I dont get why pressing SELECT+UP doesnt cause the multiple beeps and does the camera shaking only. Sorry to bump this, but I'm hitting the same issue. I installed the big Endian custom types from the video provided, downloaded BLES02057 version of DW Gundam, and I don't hear a beep when doing the steps of select + up on dpad. When I unpause, the camera is zooming in and out rapidly. Was this is ever solved?
|
|